Take a look at this 14x36 with shed roof plan - it has so much potential for many purposes! The main body is a full two-story design and measures 14x36 from outside to outside of the posts. The shed roof lean-to adds an area of 8x36 feet. You can choose to enclose the shed for more space, or leave it open to the air for a comfortable porch. The common truss and collar tie design leaves plenty of room for windows all around.
There are 504 square feet on each floor of the main frame. The shed frame adds an additional 288 square feet for a total of 1296 square feet! In the main frame, the top of joists sit at 9'-4”, and it's another 6'-2” to the top of the second level top plate. The top of the main frame rafters are at 21'-3”.
There's a 9:12 roof pitch to the main frame, while the shed frame's roof pitch is 4:12. The shed's wall plates measure 11'-2” at the top. There are generous 2' overhangs on all sides. This frame is designed to be store secured to a concrete slab foundation that is designed and engineered by others.
As soon as you make your purchase, you will receive links to download the PDFs of the plan sets . They are formatted to print on 11x17 paper, but you can print a study set on letter size paper. The construction set contains 14 pages.There are several 3D drawings to help you picture the finished product. We include floor, roof and loft plans, and elevation and section drawings.
We also include enlarged detail drawings explaining the finer points. The 36 page piece drawing set shows you every cut you'll make on each timber, fully dimensioned. The pieces are labeled to correspond to labels found in the construction set. We also include timber and connector lists, so have the information you need to budget for and purchase your materials.
Important Information:
Timber Frame HQ provides plans for construction purposes but does not oversee the construction. The plan purchaser is responsible for assuring the plan meets local codes and regulations. It is the responsibility of the plan purchaser to obtain any and all structural analysis, engineering, and specifications that may be required in the municipality in which it is to be built. Plan purchaser is to verify all lot conditions and measurements before construction. Purchaser is responsible for additional expenses incurred in order to meet local code and engineering requirements.
Customer understands that the following conditions in your specific area may require additional engineering:
Wind / hurricane / tornado
Seismic / earthquake
Heavy snow
Flood potential
Soil instability
Timber Frame Engineering
Customer understands that HVAC, Plumbing & Electrical will not be included in all plans.
When you purchase a set of plans, you are purchasing a limited copyright license for a design giving you the right to build that structure one time at your location. Your copyright license was granted when you paid the purchase fee. You do not have the right to build the design a second time unless you have a signed agreement with Timber Frame HQ. Please note that copyright law protects “derivative works” the same as it protects the original design. That means that making some changes doesn't make it a new design. We do not allow modifications of our designs by others, without permission. Your copyright license does not allow another professional to represent our design work as their own.
Timber Frame HQ retains all common law, statutory and other reserved rights, including the copyright. This applies even when you have participated in the development of the design to a significant degree.
Product code: Store 14×36 Timber Frame with Shed Roof