Hook jigs or forms for S and J- store Hooks Special set of Six sizes. 1/2" ,5/8", 3/4", 1", 1 - 1/4", 1- 1/2" sizes included. Hand made blacksmith

These are jigs forms for bending Hooks and for making custom bends in your metal. The forms are 1/2" and 5/8" and 3/4" and 1” and 1-1/4” and 1- 1/2” diameter. The 1/2, 3/4, and 5/8 are 2” tall to let you make rings or springs around them. I use these smaller sizes for small key ring hooks, horseshoe nail hooks, and for getting a close back bend on something.
In use they are place in the vice loosely, your stock is placed in, then the vice is closed to clamp your work. Then you can bend till you run out of heat. If you do the craft shows, you can use these to help speed up production. They also make sure all your hooks turn out the same size.
The rounds are welded to a 1x1 angle Iron that is about 6" long. These can be spread apart to fit small sized metal to large metal round or square. The forms have the advantage of being able to clamp the stock when bending. There should be a video at
https://youtu.be/XozNCZL6yhc store
If you would like some other special size let me know and I can see if I have the material to make you a custom made set.